Forum Replies Created

Viewing 15 posts - 1,756 through 1,770 (of 2,532 total)
1 2 3 … 117 118 119 … 167 168 169
  • Author
    Posts
  • March 29, 2015 at 4:20 pm #12313
    charlie
    Keymaster

    A few questions.
    You say you cannot remove inner from carb, why?
    How is inner attached to carb?
    How is inner attached to throttle lever?
    Inner cables usually terminate at both ends with a nipple that is soldered on. A photo of your engine and throttle would help.

    March 28, 2015 at 5:50 pm #12297
    charlie
    Keymaster

    Looks like Bulldog/Bullfinch or later model based on one of these.

    March 24, 2015 at 8:58 pm #12228
    charlie
    Keymaster

    Alan, I knew those books would come in handy.

    March 24, 2015 at 4:23 pm #12217
    charlie
    Keymaster

    Tony, the AGM was last weekend!!!!

    March 22, 2015 at 9:27 am #12171
    charlie
    Keymaster

    I am sure someone will be able to supply a copy. It might be worth contacting our magzine editor for a wanted ad to go in the magazine.

    March 18, 2015 at 8:20 am #12084
    charlie
    Keymaster

    Worth a mention in The Cultivator

    March 14, 2015 at 7:31 am #12044
    charlie
    Keymaster

    You wouldn’t want to trip and fall whilst working that beast!

    March 13, 2015 at 3:58 pm #12027
    charlie
    Keymaster

    Is that a BMB with cutter bar I see?

    March 12, 2015 at 2:34 pm #12003
    charlie
    Keymaster

    Looking in my literature collection I have an owners manual for the A15 dated June 1986.
    146cc; 3.2 hp @3400 rpm. spark plug Champion RN12YC or RN14Y gap .030in or 0.76mm. Oil grade SAE20W50 for temperatures above 16F.
    The E in the engine number indicates electronic ignition. Meetens should be able to supply any parts there are other suppliers as well.

    March 9, 2015 at 3:09 pm #11993
    charlie
    Keymaster

    spam removed

    March 8, 2015 at 8:41 am #11979
    charlie
    Keymaster

    We have a couple of standard banner designs and publicity leaflets. I can send these to you if you send me a pm with your e mail

    March 7, 2015 at 7:18 am #11972
    charlie
    Keymaster

    Sounds like I will have to send you some publicity material for the VHGMC

    March 7, 2015 at 7:17 am #11971
    charlie
    Keymaster

    I think it is a case of printing techniques were not so good at matching colours back then combined with ageing of our machines.

    March 6, 2015 at 8:27 am #11963
    charlie
    Keymaster

    Tony some very useful information there.

    March 6, 2015 at 8:25 am #11962
    charlie
    Keymaster

    One of my machines does have a cover which may well be home made as the parts list does not show or list a cover. Non of the sales leaflets I have show a cover either. The bearing inside the cover is show as a Hoffman 59.

  • Author
    Posts
Viewing 15 posts - 1,756 through 1,770 (of 2,532 total)
1 2 3 … 117 118 119 … 167 168 169