-
urbanalfa replied to the topic Rotella 10 or equivalent in the forum Help and information 3 years, 2 months ago
Rotella is a monograde, low detergent oil. Different grades were specified depending on ambient temperature, resulting in different oils being used in summer and winter. 10w30 is a multigrade oil that behaves like a 10 grade oil at low temperatures and a 30 grade oil at high temperatures
For use in the UK, SAE10 sounds low – I believe SAE20 was…[Read more]
-
urbanalfa replied to the topic Ransomes MG5 carb flooding in the forum Ride-on machines 4 years, 3 months ago
In that case it sounds like you’ve already done what I would do.
Have you spoken to Neil Jarrett?
-
urbanalfa replied to the topic Ransomes MG5 carb flooding in the forum Ride-on machines 4 years, 3 months ago
How much is it overflowing? Are you running the crawler on a hard surface?
As there is no suspension or engine mounts to absorb vibration I find they tend to shake a bit if run on a hard surface. Others with more experience may be able to explain why, but I’ve found it common to get fuel leaking from the top of the carb when the engine is idling…[Read more]
-
urbanalfa replied to the topic Villiars in the forum General talk and discussion 4 years, 5 months ago
Interesting stove, Martin.
The design looks very similar to the American built Coleman camping stove that we have. Nearly 100 years on and the design has hardly evolved at all!
-
urbanalfa replied to the topic Bristol crawler renovation in the forum General talk and discussion 4 years, 6 months ago
Looks like a fantastic project.
Aside from transport have you got suitable storage and working space for a machine as large as this? I would hope that being parked up outside hasn’t done too much damage, but as you start taking it apart it will take more space to store and be more susceptible to weather damage if stored outside in pieces rather…[Read more]
-
urbanalfa replied to the topic Howard 350 governor in the forum Pedestrian operated machines 4 years, 7 months ago
Finally got the Howard out this weekend and after resolving a fuel leak managed to adjust so that she’s running better than she has for some time.
Thank you very much for the help!
-
urbanalfa replied to the topic Howard 350 governor in the forum Pedestrian operated machines 4 years, 8 months ago
Thank you wristpin and ted20 – I’ll take a look at the throttle cable and then the governor adjustment when I can next get to it (hopefully on Monday).
-
urbanalfa started the topic Howard 350 governor in the forum Pedestrian operated machines 4 years, 8 months ago
I have a Howard 350 fitted with a Kohler K141t engine. The throttle lever doesn’t appear to increase engine revs and the governor doesn’t seem to maintain revs when load increases, either (increased load reduces revs). If I manually push the governor lever the revs pick up so the carb seems to be doing its job.
Should moving the throttle lever…[Read more]
-
urbanalfa replied to the topic E10 petrol coming Summer 2021 in the forum General talk and discussion 4 years, 9 months ago
Thanks Charlie – really helpful information.
I wonder why there is an exemption for parts of Scotland?
-
urbanalfa replied to the topic Cooper Pegler sprayer in the forum Help and information 4 years, 10 months ago
With photo…
-
urbanalfa started the topic Cooper Pegler sprayer in the forum Help and information 4 years, 10 months ago
I have a Cooper Pegler sprayer that I know nothing about. I assume from the size that it was used in commercial glasshouses or market gardens, but I’ve never seen another and know nothing about it.
It has a small two stroke engine running the pump and the front wheel is removable to allow it to be towed by a quad or garden tractor.
Has anyone…[Read more]
-
urbanalfa replied to the topic Ride on lawnmower in the forum Help and information 5 years, 6 months ago
It looks like a Horwool Triplex
-
urbanalfa replied to the topic Tyre sizes explained. in the forum General talk and discussion 6 years, 3 months ago
Thank you, Charlie. That’s a really useful resource for understanding tyre sizes.
-
urbanalfa replied to the topic Yanmar YM14 manuals in the forum Ride-on machines 6 years, 7 months ago
Thank you futtock, but unfortunately there is no such vinyl under the bonnet nor any evidence that one was previously there. Would you be able to share a photo of yours?
-
urbanalfa replied to the topic Yanmar YM14 manuals in the forum Ride-on machines 6 years, 7 months ago
Thanks Charlie – yes, I’ve managed to source a parts list from the auction site, but no service or operators information yet.
I shall keep looking and if anyone here comes across anything I’ll gratefully receive any advice!
-
urbanalfa started the topic Yanmar YM14 manuals in the forum Ride-on machines 6 years, 7 months ago
I’ve recently been fortunate enough to acquire a Yanmar YM14 garden tractor, which seems to mostly be working. I’d like to service it and keep it in good order, but the previous owner had no manual for it.
Does anyone know whether there are user or service manuals available? -
urbanalfa replied to the topic The Wheels are off in the forum Pedestrian operated machines 9 years, 2 months ago
Many thanks – I’ll give that a go.
The phosphoric acid in cola makes it useful for descaling kettles and bathrooms, too. I’d never thought of adding acid to home made penetrating fluid, though.
Any idea what makes lucozade work on chrome?
-
urbanalfa replied to the topic The Wheels are off in the forum Pedestrian operated machines 9 years, 3 months ago
Diesel_dave can you share your recipe?
-
urbanalfa replied to the topic Ransomes MG valve clearances in the forum Ride-on machines 9 years, 4 months ago
Hi Neil – that’s great, thanks.
Is there a workshop manual that lists these specifications (and others) that I could get hold of for future maintenance?
Peter -
urbanalfa started the topic Ransomes MG valve clearances in the forum Ride-on machines 9 years, 4 months ago
I have the cylinder head off my MG5 due to a rapidly exiting spark plug, which stripped its threads. I have had the head helicoiled and purchased a new spark plug so the immediate problem is resolved, but now have a couple of questions:
Are there torque settings for the cylinder head bolts?
While the head is off I would like to check valve…[Read more] - Load More